1. What is the Full Form of AQL?
AQL stands for Acceptable Quality Limit. It was previously known as Acceptable Quality Level.
2. What is AQL?
AQL is a statistical sampling inspection method used to check the quality of products.
In the garments industry, checking every garment in a large shipment is not always possible. Therefore, quality inspectors randomly select a specific number of garments from the total lot and inspect them. After inspection, the number of defects found in the selected samples is compared with the acceptance and rejection numbers in the AQL chart.
Based on the inspection results, the shipment is either accepted or rejected.
Example: If a factory has 5,000 pieces of garments, the inspector does not need to check all 5,000 pieces. Instead, a specific number of garments are selected according to the sampling plan and inspected.
3. What is MIL-STD-105E?
MIL-STD-105E was a military sampling inspection standard developed in the United States.
It provided a systematic method of selecting a small number of products from a large production lot for quality inspection. The inspection results were used to decide whether the entire lot should be accepted or rejected.
Later, MIL-STD-105E was replaced by ANSI/ASQ Z1.4. Today, these sampling principles are widely used in different manufacturing industries, including garments.
4. What are the Common AQL Values?
In the garments industry, different AQL values are used according to buyer requirements and product quality standards.
Some commonly used AQL values are:
- AQL 1.0%
- AQL 1.5%
- AQL 2.5%
- AQL 4.0%
- AQL 6.5%
- AQL 10.0%
The selected AQL value depends on the buyer's requirements, product type and agreed inspection plan.
Note: These are different AQL values, not six separate types of AQL.
5. What are the Types of Garment Defects?
During garment inspection, defects are generally classified into three main categories.
A. Critical Defect
A critical defect is a serious problem that may create safety risks for the customer or violate product safety requirements.
Examples:
Broken needle inside the garment.
Sharp metal objects inside the product.
Unsafe accessories.
Harmful chemical contamination.
Critical defects usually have zero acceptance, according to buyer requirements.
B. Major Defect
A major defect is a problem that significantly affects the appearance, fitting, function or usability of a garment.
Examples:
Open seam.
Broken stitch.
Fabric hole.
Wrong measurement.
Incorrect shade.
Visible stains.
Wrong accessories.
C. Minor Defect
A minor defect is a small problem that does not seriously affect the appearance or usability of the garment.
Examples:
Loose threads.
Slight uneven stitching.
Small removable marks.
Minor finishing problems.
Note: The acceptance limits for Critical, Major and Minor defects depend on buyer requirements and the approved inspection plan.
6. What is an AQL Sampling Plan?
An AQL sampling plan is a system used to determine how many garments should be inspected from a production lot and how many defects can be accepted.
There are five important elements in an AQL sampling plan:
Lot Size: The total quantity of garments presented for inspection.
Sample Size: The number of garments selected for inspection.
Inspection Level: Determines the sample size code.
AQL Value: The selected quality acceptance criterion.
Acceptance and Rejection Numbers: The numbers used to decide whether the lot passes or fails the inspection.
7. What are the AQL Inspection Levels?
According to ANSI/ASQ Z1.4, there are three General Inspection Levels and four Special Inspection Levels.
General Inspection Levels:
General Level I (GI)
General Level II (GII)
General Level III (GIII)
Special Inspection Levels:
S-1
S-2
S-3
S-4
The three General Inspection Levels are explained below:
General Level I: Requires a relatively smaller sample size.
General Level II: The normal and commonly used inspection level in many industries.
General Level III: Requires a relatively larger sample size.
The inspection level is selected according to the buyer's requirements and inspection plan.
8. What is an AQL Chart?
An AQL chart is a reference table used by quality inspectors to determine the sample size and acceptance or rejection numbers for a production lot.
Generally, an AQL chart has two main tables.
Table 1: Sample Size Code Letter
This table helps inspectors find the sample size code according to the total lot quantity and inspection level.
Table 2: Single Sampling Plan
This table helps inspectors determine:
Sample Size.
AQL Value.
Acceptance Number (Ac).
Rejection Number (Re).
These values are used to make the final inspection decision.
9. Example of AQL Inspection
Suppose a garments factory has a shipment of 5,000 pieces.
The buyer requires the following inspection plan:
Lot Size: 5,000 Pcs
Inspection Level: General Level II
AQL: 2.5%
Sampling Plan: Single Sampling
First, the inspector checks the AQL chart to find the sample size code letter.
Next, the inspector uses the sampling table to determine the required sample quantity and the Acceptance and Rejection Numbers.
After inspecting the selected garments, the inspector compares the number of defects with the Ac/Re numbers.
If the defect count is equal to or below Ac, the lot passes the sampling acceptance criteria.
If the defect count reaches or exceeds Re, the lot is rejected.
Note: The actual sample size and Ac/Re numbers must be taken from the correct AQL standard and buyer-approved inspection plan.
10. What is the Difference Between AQL and OQL?
AQL is a sampling inspection criterion used to decide whether a production lot should be accepted or rejected.
OQL refers to the actual quality condition observed during production or inspection. It helps evaluate the quality performance of a product.
Main Differences:
| AQL | OQL |
|---|---|
| Sampling acceptance criterion | Observed quality condition |
| Used for lot acceptance or rejection | Used for quality monitoring |
| Based on an inspection plan | Based on actual inspection results |
| Helps decide shipment acceptance | Helps evaluate quality performance |
11. Importance of AQL in the Garments Industry
AQL plays an important role in maintaining product quality in the garments industry.
The major benefits of AQL are:
Quality Control: Helps identify defects in garments.
Quality Assurance: Helps verify whether products meet buyer requirements.
Shipment Inspection: Helps make shipment acceptance or rejection decisions.
Buyer Satisfaction: Helps maintain the required quality standards.
Time Saving: Reduces the need to inspect every single garment.
Defect Reduction: Inspection results help factories identify problems and take corrective actions.
Conclusion
AQL is an important part of garment quality inspection. It provides a systematic method of checking product quality through random sampling.
It helps factories evaluate production quality and make proper shipment acceptance or rejection decisions.
Every textile engineer, quality inspector and garment professional should have a clear understanding of AQL, defect classification, inspection levels and sampling plans.
Understanding AQL helps maintain product quality and meet buyer expectations.


Your are always welcome. Your valuable comments warmly appreciated